Samsung NX 10 ユーザーズマニュアル

After setting the OIS switch, select the OIS function in 
the menu option

  In Shooting mode, press [MENU].

 Select Shooting3 (

/

) 

→ OIS →  

an option.

The OIS function is applied only when 
pressing the shutter in full or half.

The OIS function is always applied.

The OIS function may not work well in the following 
situations:

When you take a picture while tracing a moving 
object

When a big vibration occurs beyond the range of 
stabilization

When the shutter speed is too slow due to a 
circumstance like night shooting

When the battery capacity is not sufficient

When you are shooting a close-up shot

When you use a tripod, please disable the OIS 
function since the image can be shaken due to the 
vibration of OIS function.

If the camera is struck or dropped while you are 
taking a picture, the display can be impaired. If this 
occurs, turn the camera off and then on, and the 
camera should operate normally again.

Since the battery consumption can increase along 
with the use of OIS function, it is recommended to 
use the function only if needed.

To set the OIS function by using the menu, set 
[OIS] of lens to ON. This function may not operate 
depending on the lens model.

The function can be set directly by pressing [Fn] in 
the shooting mode.

•

-

-

-

-

-

•

•

•

•

•