Samsung EVNX200ZBSBUS ユーザーズマニュアル
74
Shooting Functions >
Flash
Correcting the red-eye effect
If the flash fires when you capture a photo of a person in the dark, a red
glow may appear in the eyes. To prevent this, select Fill-in Red.
glow may appear in the eyes. To prevent this, select Fill-in Red.
Without red-eye correction
With red-eye correction
If the subject is too far from the camera or moves when the first flash fires,
red-eyes may not be reduced.
red-eyes may not be reduced.
Adjusting the flash intensity
Adjust the flash intensity to avoid overexposure or underexposure.
You can adjust it by ± 2 levels.
You can adjust it by ± 2 levels.
To set the flash
intensity,
intensity,
In Shooting mode, press [
f]
►
Flash
►
an option
►
[
D]
►
scroll the jog dial or rotate the navigation button, or
press [
C/F].
Flash Option
Back
Reset
Flash : Fill in
•
Adjusting the flash intensity may not be effective when:
-
the subject is too close to the camera
-
you set a high ISO sensitivity
-
the exposure value is too big or too small
•
In some shooting modes, you cannot use this function.
•
If you attach an intensity-adjustable external flash to the camera, the
intensity settings of the flash will be applied.
intensity settings of the flash will be applied.
•
If the subject is too close when you use the flash, some light may be
blocked, resulting in a dark photo. Ensure that the subject is within the
recommended range, which varies by lens.
blocked, resulting in a dark photo. Ensure that the subject is within the
recommended range, which varies by lens.
•
When a lens hood is attached, the light from the flash can be blocked by
the hood. Remove the hood to use the flash.
the hood. Remove the hood to use the flash.