Samsung SCC-C4305(P) ユーザーズマニュアル

ページ / 19
4
E
3
Cautions
1.  Do not drop objects on the product or apply strong shock
to it. Keep away from a location subject to excessive
vibration or magnetic interference.
2.  Do not install in a location subject to high temperature,
low temperature, or high humidity. (Doing so may cause
fire or electrical shock.)
3.  Avoid a location which is exposed to direct sunlight, or
near heat sources such as heaters or radiators.
(Neglecting to do so may result in a risk of fire.)
4.  If you want to relocate the already installed product, be
sure to turn off the power before moving or reinstalling it.
5.  Install in a well-ventilated location.
6.  Remove the power plug from the outlet when there is a
lightning storm. (Neglecting to do so may cause fire or
damage to the product.)
4.  Securely plug the power cord into the power receptacle.
(A loose connection may result in fire.)
5.  When mounting the camera on a wall or ceiling, fasten it
safely and securely. (A falling camera may cause
personal injury.)
6.  Do not place conductive objects (e.g., screwdrivers,
coins, and metal things) or containers filled with water on
top of the camera. 
(Serious injury may result from fire, electrical shock, or
falling objects.)
7.  Do not install the unit in humid, dusty, or sooty locations.
(Doing so may cause fire or electrical shock.)
8.  If any unusual smells or smoke come from the unit, stop
using the product. In such case, immediately disconnect
the power source and contact the service center.
(Continued use in such a condition may cause fire or
electrical shock.)
9.  If this product fails to operate normally, contact the store
of purchase or your nearest service center. Never
disassemble or modify this product in any way.
(Problems caused by unauthorized user disassembly or
repairs are not covered by your warranty.)
10. When cleaning, do not spray water directly onto parts of
the product. (Doing so may cause fire or electrical
shock.) Gently wipe the surface with a dry cloth. Never
use detergents or chemical cleaners on the product, as
this may result in discoloration of surface or cause
damage to the finish.