Samsung GX-20 ユーザーズマニュアル

047

Choose the part of the screen to use for measuring brightness and  
determining exposure.  

  

Multi-segment  

 

 metering

Segment the screen in 16 parts, meter each portion and 

determine the appropriate exposure.

  

Centre-weighted    

 metering

Measure the entire screen with an emphasis on the centre 

and determine the exposure.

   Spot metering

Measure only the centre of the screen and determine 

exposure.

h  Set with the metering mode lever.

This allows you to deliberately over expose (brighten) or under expose (darken) 
your picture. You can adjust the EV Compensation from -3 to +3 (EV) in   
increments of 1/2 EV or 1/3 EV. For information about under or over exposed 
samples, see page 90, “Changing the Exposure and Shooting (Auto Bracket).”

1.  Set the compensation with the front dial 

(

) while the 

 

button is pressed.

2. Confi rm the compensation value in the 

viewfi nder.

“+” or “-” appears during compensation.

●  Exposure compensation is not available when the exposure mode is set 

to 

 (Auto mode), M (Manual), B (Bulb), and X (Flash synchro) mode.

●  The exposure compensation is not cancelled by turning the camera off 

if you select the [EV Compensation] in the [Memory of Settings] of 

[CAPTURE MENU].

●  The is set to 0 when 

 button and green button ( ) are pressed at 

the same time.

Compensation value

The metering mode lever

The metering mode Indicator