Samsung GX-20 ユーザーズマニュアル

091

●  When the focus mode is set to SAF (Single mode), the focus is locked in 

the fi rst frame position and used for subsequent consecutive frames.

●  The auto bracketing exposure setting will remain effective for twice as long 

as the exposure metering timer (default setting is 20 seconds) when you 

release your fi nger from the shutter release button during auto bracketing, 

and you can take the next picture at the next compensation value. In this 

case, auto focusing works for each frame. After about twice as much time 

as the exposure metering timer (default setting is 20 seconds), the camera 

returns to settings for taking the fi rst picture.

●   You can combine Auto Bracket with the built-in fl ash or external fl ash  

(P-TTL auto only) to change only the fl ash output continuously. However, 

when using an external fl ash, holding the shutter release button down to 

take three continuous frames may cause the second and third frame to be 

taken before the fl ash is fully recharged. Always take one frame at a time 

after confi rming that charging is complete.

●   Auto Bracket is not available when the exposure mode is set to 

(Auto 

mode) and B(Bulb) mode.

With the previously compensated set of the exposure value, you can have the under 

exposure or over exposure shots only.