Samsung SLB-0937 ユーザーズマニュアル

042



Using the Custom White Balance

White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for
a given shooting environment by setting up the custom white balance.
1. Select the CUSTOM (

) menu of the

White Balance and place a sheet of
white paper in front of the camera so
that the LCD monitor shows only white.

2. MENU/OK button: Selects previous

custom white
balance.

Shutter button: saves new custom white balance.
– The custom white balance value will be applied, starting with the

next picture you take.

– The user conﬁ gured white balance will be remain effective until it is

overwritten.

This camera automatically adjusts the exposure according to the ambient

lighting conditions.

You can also select the exposure value by using the Fn button.



Compensating Exposure

1. Press the Fn button, and then use the

Up/Down button to select the exposure
compensation ( ) icon. The exposure

) icon. The exposure

compensation menu bar will appear as
shown.

2. Use the Left/

Left

Left Right button to set the

desired exposure compensation factor.

3. Press the Fn button again. The value you set will be saved and the

Exposure Compensation setup mode will close. If you change the
exposure value, the exposure indicator ( ) will be displayed on the

) will be displayed on the

bottom of the LCD monitor.



A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor should appear white or you may not
get good pictures.

Fn button: Exposure compensation

Fn button: White balance

EXPOSURE VALUE

-2

-1

White paper