Samsung SNC-L200(W) ユーザーズマニュアル
Netcam(W)_SNC-L200(W)
87
Netcam(W)_SNC-L200(W)
86
Using the MultiViewer
Recording Motion
Click the video you want to
motion-record on the MultiViewer
Screen.
Click the Motion Button(
).
-
The Motion Record Screen
appears.
Click the Motion area in the
16-split screen.
- The motion area is displayed in
green color.
green color.
- Click the button again to clear the
motion area.
motion area.
Enter the Sensitivity Value.
- Enter a value between 1 and
10.The level of sensitivity
increases close to 10.
increases close to 10.
Click the Pretest Button.
- The Sensitivity Setting Value is
temporarily stored.
- When a motion is detected, the
motion area turns red, and
blinks.Testing starts.
blinks.Testing starts.
Set the motion area in the 16-split video, and automatically record video when a
motion is detected in the set area. This function is applied to only one channel.
motion is detected in the set area. This function is applied to only one channel.
The motion area turns red, and blinks. Recording starts automatically.
- The REC-A is displayed on the screen, and video is recorded for up to 10 minutes.
When a motion is detected in the motion area
Set the most appropriate value by
repeating the step 3 to 5.
Click the “Enable Motion Detection” to
display the motion detection.
- The motion detection is selected.
- To clear the motion detection, click the
button again and clear the display.
Click the OK Button.
- Settings are completed.
The Motion Detection detects and records a motion, while the PIR
detects infrared.
Note
1
3
5
4
2
3
4
5
6
7
7
8
8