Samsung SCC-B5205(S) ユーザーズマニュアル
User Guide
User Guide
■
Function Switch
Function switch located at the rear side of the camera within the dome
cover. Sets the White Balance mode.
Function switch located at the rear side of the camera within the dome
cover. Sets the White Balance mode.
■
ATW (Auto Tracing White Balance
Automatically adjusts the color temperature of the screen (within 2500-
9500 color temperature range) according to the temperature change in
external environments.
Automatically adjusts the color temperature of the screen (within 2500-
9500 color temperature range) according to the temperature change in
external environments.
■
AWC (Auto White Balance Control)
Adjusts the color temperature to the color temperature stored when
switched to AWC.
Adjusts the color temperature to the color temperature stored when
switched to AWC.
4
5
3. Function of Each Component
■
Fixed focus lens
• Fixed focus lens installed on the camera.
• Fixed focus lens installed on the camera.
Please take cautions that any dust or foreign matter gathers on the
front glass surface of the lens.
front glass surface of the lens.
■
Main body
• A body that supports the camera.
• A body that supports the camera.
■
PCB board
• This part is quite important since it performs the camera function.
• This part is quite important since it performs the camera function.
Please handle with care.
■
Power cable
• The terminal that is connected to the power (adaptor) cable.
• The terminal that is connected to the power (adaptor) cable.
Connect to DC 12V.
■
Video signal output cable
• The cable that sends the video signal.
• The cable that sends the video signal.
■
Dome cover
• The transparent plastic cover that protects the camera.
• The transparent plastic cover that protects the camera.
Be careful not to make a scratch on it.
E
ATW AWC
SW75