Samsung SCD105 ユーザーズマニュアル
ENGLISH
Preparation
23
23
Connecting a Power Source
There are two types of power source that can be connected to your camcorder.
-
-
The AC Power Adapter and AC cord : used for indoor recording.
-
The Battery Pack : used for outdoor recording.
To use the AC Power adapter and DC Cable
1. Connect the AC Power adapter to the AC cord.
2. Connect the AC cord to a wall socket.
2. Connect the AC cord to a wall socket.
Notes
■
You must use the AC Power adapter of AA-E8 TYPE.
■
The plug and wall socket type may differ according to
your resident country.
your resident country.
3. Connect the DC cable to the DC jack socket of the
camcorder.
(When the battery is attached on the set, you should keep
outside the projection of the DC cable.)
(When the battery is attached on the set, you should keep
outside the projection of the DC cable.)
4. Set the camcorder to each mode by holding down the tab
on the power switch and turning it to the CAMERA or
PLAYER mode.
PLAYER mode.
To select the CAMCORDER mode
✤ If you want to use this unit as a camcorder, set the mode switch to TAPE position.
✤ If you want to use this unit as a DSC (Digital Still Camera), set the mode switch to
MEMORY CARD position.
MEMORY
CARD
CARD
TAPE
Power Switch
00743R SCD103 SEA (01~27) 5/31/04 8:57 AM Page 23