Samsung S500 ユーザーズマニュアル

70

5. Enter a destination number on the Address 

screen.

To clear or clear all your input, press or press 
and hold the C key. When you have no input, 
press and hold the C key to move to the 
previous screen.

You can search for a number in Phonebook by 
pressing the Phonebook soft key.                       

If you want to send the message to multiple 
destinations up to 5, press the Add soft key and 
repeat Step 5.

6. When you have finished entering the numbers, 

press the Ok soft key.

The message is sent.

: When the phone fails to send the message, 

“Error” displays. Press the Retry soft key to try 
again the transmission. You can save the 
message or exit the menu by pressing the No 
soft

 key.

Before using the voice mail service, you must store 
the voice mail server number obtained from your 
service provider.

To save the voice mail server number, select the 
Voice mail menu option and Voice server 
number (Menu 1.4.2). Enter the voice mail server 
number and a name, if required, then press the Ok 
soft key to save it.

71

When you receive a voice mail, your phone displays 
the voice mail indicator and you hear an alert, 
depending on the message sound setting; for 
further information, see page 80.

There are three ways to access your voice mail box:

• In Idle Mode, when you receive a new voice mail, 

press the Connect soft key to access your voice 
mail server and follow the instructions provided.

• In Idle Mode, hold the 1 key down to access your 

voice mail server and follow the instructions 
provided.

• Call your voice mail server number by accessing 

the Connect to voice mail menu (Menu 1.4.1) 
and follow the instructions provided.

Using this menu, you can preset up to ten 
messages that you use most frequently. When you 
access this menu, the preset message list displays. 

1. Scroll to a message or an empty entry by 

pressing the Up or Down key. 

2. Press the Select soft key and enter a new 

message or change the old message. 

For further details about entering characters, 
see page 36.

3. Press the Ok soft key to save the message.