Samsung S500 ユーザーズマニュアル

100

: When the Quiet mode is activated, the alarm 

tone doesn’t sound. But When you set a Morning call, 
it sounds the alarm tone even if the Quiet mode is 
activated.

To set the alarm to ring even if your phone is 
switched off:

1. Scroll to Auto power on the Alarm list and 

press the Select soft key. 

2. If necessary, press the Up or Down key to select 

On.

To turn the Auto Power feature off, select Off.

3. Press the Select soft key to save the setting.

4. When you have finished, press the 

 soft key or 

the 

 key to exit.

Once you have activated the auto power alarm, a 
check mark appears ahead of Auto power. If the 
phone is switched off at the specified alarm time, it 
automatically switches on and rings the alarm. It 
then automatically switches off again.

You can use the phone as a calculator. The 
calculator performs basic arithmetic functions, such 
as addition, subtraction, multiplication, division and 
percentages.

To perform a calculation:

1. Enter the first number using the number keys.

: To erase any mistakes or clear the display, 

press the C key.

101

2. Press the 

 key to enter a decimal point (.) or 

the 

 key to enter the appropriate arithmetic 

symbol: + (add), - (subtract), * (multiply), / 
(divide), % (remainder), ( or ).

3. Enter the second figure.

4. Repeat Steps 2 and 3, if necessary.

5. Press the Equal soft key to view the result. 

The result appears in the Answer box.

: The result is rounded to six decimal places.

6. When you have finished, press the 

 soft key or 

the 

 key to exit.

This menu option allows you to convert from one 
type of unit to another.

To convert a value:

1. Scroll to the type of conversion to be performed 

from Currency, Length, Weight, Volume, 
Area and Temperature, and press the Select 
soft key.

2. Enter the value to be converted and press the 

Down key to move to the From field. 

You can enter a decimal point (.) using the 

 

key.

3. Select the original unit by pressing the Left or 

Right key and press the Down key to move to 
the To field.