Samsung C4335(P) ユーザーズマニュアル

Even in the Night mode, you can see colour images in bright  

illumination. Therefore, you can select any of [COLOR…] and [BW…]. 

In case of [COLOR…], you have to set the colour temperature for white 

balance. You can also specify the settings for red and blue colours on 

your own. In case of [BW...], the burst signals are output with the BW 

Composite Video signals, when the BURST is set to [ON]. And no burst 

signals are output when the BURST is set to [OFF].

When it is set to [NIGHT], [WHITE BAL] of the video set will be 

displayed as “---“. You cannot adjust the settings manually.

When it is set to [COLOR] in the NIGHT mode, the white balance 

will be setting as the same value in [COLOR] mode.

This automatically converts the Day mode to the Night mode and 

vice versa depending on illumination. In low illumination, it removes 

the IR filtering function to raise the sensitivity. Otherwise, it activates 

the IR filtering function to lower the sensitivity. 

If you press the 

SETUP switch when the [AUTO…] submenu is 

selected, the corresponding screen appears.

(AUTO)

LEVEL.

(.0).I.�.�.�.�.�.�.

DAY..NIGHT

.

........

2.S

NIGHT..DAY

.

......

5.S

RET

(BW)

BURST 

 

OFF

RET

(COLOR)

WHITE BAL 

 

ATW2

RET

SCC-C4333_Eng-EURO.indd   28

2007-11-12   오전 10:18:27