Samsung SHC-730N/P ユーザーズマニュアル
COLOR CCD CAMERA
COLOR CCD CAMERA
User’s Manual
User’s Manual
5
4
Features
Warning
Fine Picture in Ultra Low
illumination.
illumination.
SSNR(Samsung Super Noise
Reduction)
Reduction)
SHC-730 has powerful DSP that can
remove image noise efficiently and it
shows clean and obvious image under
low illuminance.
remove image noise efficiently and it
shows clean and obvious image under
low illuminance.
SV-III built-in DSP and 1/3 high density
CCD allows bright and high quality
images to be captured in ultra low light
condition.
- 0.05 Lux in Normal Color Mode
- 0.0004 Lux in Sens-Up Mode
CCD allows bright and high quality
images to be captured in ultra low light
condition.
- 0.05 Lux in Normal Color Mode
- 0.0004 Lux in Sens-Up Mode
Motion Detection
The camera transmits an alert signal to
the MD Output Terminal when it detects
motion of an object. If you connect an
optional alarm to the camera, you can
get the effective surveillance.
the MD Output Terminal when it detects
motion of an object. If you connect an
optional alarm to the camera, you can
get the effective surveillance.
VIDEO/DC Lens Selectable
The camera accepts 2 types of auto iris
lenses (DC type/VIDEO type) and is set
with the VIDEO/DC selection switch.
lenses (DC type/VIDEO type) and is set
with the VIDEO/DC selection switch.
Miscellaneous Function
Privacy, Flip(H/V-REV), D-ZOOM, Burst
ON/OFF, SYNC(INT/LL), COLOR, TONE,
SHARPNESS.
ON/OFF, SYNC(INT/LL), COLOR, TONE,
SHARPNESS.
Controlled by OSD menu and
RS-232C
RS-232C
You can control the camera using OSD
menu and RS-232C jack at a remote
place.
menu and RS-232C jack at a remote
place.
High Resolution
The horizontal resolution of 520TV lines
at Color mode and 570TV lines at BW
mode can be achieved by using a high
density CCD having Double Speed
410,000 pixels SONY CCD, which provides
clean, noiseless and reliable pictures.
at Color mode and 570TV lines at BW
mode can be achieved by using a high
density CCD having Double Speed
410,000 pixels SONY CCD, which provides
clean, noiseless and reliable pictures.
Day & Night
The camera provides automatic mode
change over by sensing day or night
conditions. It can change color mode in
the day condition for optimal color and
BW mode in night condition for clear
identification.
change over by sensing day or night
conditions. It can change color mode in
the day condition for optimal color and
BW mode in night condition for clear
identification.
The camera needs periodic inspection.
Contact an authorized technician for inspection.
Stop using your camera when you find a malfunction.
If you use your camera around smoke or unusual heat for a long time, a
fire may be caused.
fire may be caused.
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not disassemble the camera.
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in fire or other hazards.
Wide Dynamic Range(WDR)
SV-III DSP has Strong compensation
performance in WDR.
So It always shows obvious, clear and perfect
light contrast picture in any environment.
performance in WDR.
So It always shows obvious, clear and perfect
light contrast picture in any environment.