Samsung 360 ユーザーズマニュアル

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1.  Press the POWER P button on the remote control.

You can also use the 

POWER P button on the TV.

The message 

Menu Language, Store Demo, Channels, and Time will be set. is 

displayed.

2.  Press the ENTERE button, then Sets the menu language. menu is automatically 

displayed.

3.  Press the ▲ or ▼ button to select the language, then press the ENTERE button. The message Select ‘Home Use’ when 

installing this TV in your home. is displayed.

4.  Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTERE button. The message Select the 

Antenna source to memorize. is displayed.

We recommend setting the TV to 

Home Use mode for the best picture in your home environment.

Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and 

you want to return to 

Home Use (Standard): Press the volume button on the TV. When the volume OSD is displayed, 

press and hold the 

MENU button on the TV for 5 seconds.

.  Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTERE button to select Start.

Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.

In Cable mode, you can select the correct signal source among 

STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► 

button, then press the 

ENTERE button. If you have Digital cable, select the cable system signal source for both Analog 

and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.

6.  Press the ENTERE button to select Start. The TV will begin memorizing all of the available channels.

To stop the search before it has finished, press the 

ENTERE button with Stop selected.

After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then 

reappears. Press the 

ENTERE button when channel memorization is complete. The message Set the Clock Mode. is 

displayed.

7.  Press the ENTERE button.

Press the ▲ or ▼ button to select 

Auto, then Press the ENTERE button. The message Set to daylight saving time. is 

displayed. If you select 

Manual, Set current date and time is displayed.

8.  Press the ▲ or ▼ button to select Off, On or Auto, then press the ENTERE button.
9.  Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTERE button. If you have received a 

digital signal, the time will be set automatically. If not, see page 30 to set the clock.

10.  The connection method to provide the best quality HD is offered. After confirming the method, press the ENTERE button.
11.  The message Enjoy your watching. is displayed. When you have finished, press the ENTERE button.

1.  Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE button.
2.  Press the ENTERE button again to select Plug & Play.

The 

Plug & Play feature is only available in the TV mode.

¦

N
N

N
N

N
N

N
N

N

Menu Language, Store Demo, Channels, and Time will be set.

E Enter

Start

BN68-01975A-00L02.indb   22

2009-01-23   �� 5:07:59