JVC VN-V25U VN-V26U ユーザーズマニュアル
44
This page is for setting JPEG and MPEG4 encoding parameters.
This page can be used during access using
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● When settings on this page are altered during playback using the built-in viewer, reboot the viewer.
● There is a maximum limit to the bit rate for transmission by VN-V25U/26U. If a bit rate that exceeds
the maximum limit is specified, this new setting will not be applied. For details on the maximum
transmission limit, refer to the section on
transmission limit, refer to the section on
A
For setting the frame size of each JPEG or MPEG4 screen to VGA (640 x
480) or QVGA (320 x 240).
Select one of the four different patterns.
When the frame size of JPEG is the same as MPEG4, the privacy mask can
be displayed on both images. When the frame size of JPEG is different from
MPEG4, privacy mask can only be displayed on QVGA images. (
480) or QVGA (320 x 240).
Select one of the four different patterns.
When the frame size of JPEG is the same as MPEG4, the privacy mask can
be displayed on both images. When the frame size of JPEG is different from
MPEG4, privacy mask can only be displayed on QVGA images. (
A
B
C
D
E
F
G
VN-V25U_26U_EN.book Page 44 Friday, January 18, 2008 2:56 PM