JVC GR-DVX48A ユーザーズマニュアル

 EN

6

Play/Pause Button
(4/6)

Still images can be dubbed from a tape to a memory
card.

Load a memory card (

Z pg. 14) and cassette

(

Z pg. 12).

Select the Snapshot mode in the Menu Screen
(

Z pg. 26) to use for dubbing the image to the

memory card.

Set the VIDEO/DSC Switch to “VIDEO”, then set the
Power Switch to “

” while pressing down the

Lock Button located on the switch.

Press the MENU Wheel in. The Menu Screen
appears. Rotate it to select “

 VIDEO” and press

it. The VIDEO Menu appears.

Rotate the MENU Wheel to select “
COPY” and press it. The Sub Menu appears. Rotate
it to select “ON” and press it. Selection is complete.

Rotate the MENU Wheel to select “ RETURN” and
press it twice. The normal playback screen resumes.

To select a still image to be dubbed, start playback
by pressing 4/6. At the moment you find the
image you wish to dub, press it again to engage Still
Playback.

To start dubbing, press SNAPSHOT. The selected
image is stored in the memory card.
•“

” blinks during dubbing.

●

If SNAPSHOT is pressed in step 8 when a memory card
is not loaded, the message “COPYING FAILED” is
displayed.

●

If an image recorded on the tape using the WIDE mode
(

Z

 pg. 40) is dubbed to a memory card, the WIDE

mode identifying signal is not dubbed with it.

●

To use Playback Special Effects with a video image you
wish to dub, perform up to step 8 using the remote
control (provided) (

Z

 pg. 65).

●

Images are dubbed in VGA file size.