Ricoh Caplio R2 ユーザーズマニュアル
112
Changing Auto Power-Off Settings
(AUTO POWER OFF)
If you do not operate the camera for the set period of time, it will shut
off automatically (Auto Power-off) to conserve battery power.
At the time of purchase, Auto Power-Off is set to one minute, but you
can change this setting.
off automatically (Auto Power-off) to conserve battery power.
At the time of purchase, Auto Power-Off is set to one minute, but you
can change this setting.
To change the Auto Power-Off setting, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.107.
2.
Press the !" button to select
[AUTO POWER OFF] and press
the O or $ button.
[AUTO POWER OFF] and press
the O or $ button.
3.
Press the !" buttons to select
the desired setting.
the desired setting.
4.
Press the O or # button.
5.
If you pressed the # button in
step 4, press the M button.
step 4, press the M button.
This setting will be used until you change it.
Note
• To continue on using the camera after auto power-off, slide the power switch to close the
lens cover once (power-off) and slide it again to open (power-on). When the Playback
button is pressed, the lens cover does not open but the camera is turned on for use in
Playback Mode.
button is pressed, the lens cover does not open but the camera is turned on for use in
Playback Mode.
• The Auto Power-off function does not work when the camera is connected to a computer.
• When shooting with Interval Shooting, settings made here are not valid and Auto Power-Off
• When shooting with Interval Shooting, settings made here are not valid and Auto Power-Off
does not work.
Possible Settings
OFF (The Auto Power-Off function does not work)
1 Minute *Setting upon purchase
5 Minutes
30 Minutes
1 Minute *Setting upon purchase
5 Minutes
30 Minutes