Sakar Spy shot digital camera ユーザーズマニュアル

5

.  Press the mode button to select “CP” or “nP” shown on the LCD 

display.

.  If the LCD displays “CP” this means that the present compression is 

“nP” and in order to change to “CP”, click on the shutter button within 

5 seconds. 

3.  If the LCD displays “nP” this means that the present compression is 

“CP” and in order to change to “nP”, click on the shutter button within 

5 seconds. 

4.  All photos taken after changing compression will be at the new 

compression.

  The photo compression and resolution settings determine the number 

of photos and the amount of memory required for each photo. The 

following table tells you how many photos can be taken based on the 

image resolution and compression:

.  Press the mode button to select   shown on the LCD display. 
.  Hold the shutter button down.
3.  The camera will beep 3 times (once for each photo taken).
4.  Continuous photo shooting may fail under poor lighting conditions.  

Note: Photos taken in continuous shot mode will be saved in JPEG format. 

Hr

nP

0 photos

Lr

CP

43 photos

Hr

CP

60 photos

Lr

nP

8 photos

.  Slide open the viewfinder and move the Photo/Voice selector to 

Photo position. 

.  Compose your shot using the viewfinder. (The optimal distance 

between the camera and the subject is approximately 5 feet).

3.  Hold the camera steady and press the shutter button to take photos.
4.  The camera will beep when a photo is taken. 

If the camera fails to beep or if a “0” appears on the LCD display this 

is an indication that the memory is full in which event no further photos 

can be taken until the existing photos have been downloaded from the 

memory of the camera.
Note: The LCD display indicates how many photos may still be taken 

at the current resolution and compression. In “Lr” resolution and “CP” 

compression 43 images may be taken. However the LCD counter only 

displays up to 99. It will continue to display 99 until less than 99 images 

may still be taken.

There are  photo resolutions to select from, Hr or Lr. 

 

.  Hr” or “Lr” shown on the LCD display.
.  If the LCD displays “Hr” this means that the present resolution is “Lr” 

and in order to change to “Hr”, click on the shutter button within 5 

seconds. 

3.  If the LCD displays “Lr” this means that the present resolution is “Hr” 

and in order to change to “Lr”, click on the shutter button within 5 

seconds. 

4.  All photos taken after changing resolution will be taken at the new 

resolution.