Sanyo VPC-HD1E ユーザーズマニュアル

English

Select the desired icon from the 
manual exposure menu, and press 
the SET button.
<If T, g or , was selected>
1 Toggle the SET button up or down 

to select ND filter, aperture value 
or shutter speed.

2 Toggle the SET button left or right 

to change the setting for the 
selected parameter. 

Press the SET button.
h This completes the exposure 

setting.

i To prevent the effects of camera shake at slow shutter speeds, it is 

recommended to use a tripod or other method to stabilize the camera.

i A slow shutter speed may be useful for photographing in a darker 

environment, but noise in the image may be increased.

i To minimize noise in the image, enable the noise reduction function 

(page 126).

i The manual exposure setting automatically becomes @ if the scene 

select function is active or if the mode is set to the AE shift sequential shots 
mode.

i In the sequential shots mode, the shutter speed is faster than 1/15 sec.
i When a video clip is recorded in a video mode other than 

T with the 

shutter speed set to slower than 1/29 sec., the shutter speed during 
recording is 1/30 sec. And when a video clip is recorded in the 

T video 

mode with the shutter speed set to slower than 1/59 sec., the shutter 
speed during recording is 1/60 sec.

i If the exposure setting is 

,

 and the ISO sensitivity set is other than t 

(page 83), the exposure correction setting will be disabled.

F3.5

1/1500

Shutter speed
Aperture

ND filter