Sharp DIGITAL CAMERA ユーザーズマニュアル

 

™ User Manual

 

12 

The camera gets the necessary power from the computer via the fire-wire cable. If the power 
provided by the PC is not enough an additional power supply unit is included with the camera 
system package. The external power supply is only required when a laptop and/or a 6 to 4 pin 
cable is used. The external power supply is also required for camera models that incorporate 
an additional cooling module. All communication and data transfer with the host computer is 
done via the IEEE 1394™ interface. This interface requires a single cable, which is also 
supplied with the camera package. External triggering and synchronization are done via the 
dedicated connector (PS2 type). Triggering is expected to be done with a TTL pulse. The 
synchronization signal is also TTL level. 

1.  Connect the fire-wire cable to an available fire-wire port on your computer. 

2.  Turn the camera ON/OFF switch to the ON position and wait a few seconds for the 

camera to initialize it self. 

3.  Follow the on-screen instructions. Click on the YES or Continue Anyway button when 

prompted by the Windows 2000 or XP Operating system to proceed with the installation. 

1.  Connect the fire-wire cable to an available fire-wire port on your computer. 

2.  Turn the camera ON/OFF switch the ON position and wait a few seconds for the camera 

to initialize it self.