Pentax Optio E90 ユーザーズマニュアル

2

In this manual, the capture mode, such as for taking still pictures, is referred 
to as “A mode” (the capture mode). The playback mode, such as for 
displaying captured images on the display, is referred to as “Q mode” (the 
playback mode). In Q mode, you can perform simple editing operations on 
the images that are played back.
Follow the procedure below to switch between A mode and Q mode.

1

Press the Q button.

The camera switches to 

Q

 mode.

1

Press the Q button or the shutter release button 
halfway.

The camera switches to 

A

 mode.

Switching Between A Mode and Q Mode

To Switch from A Mode to Q Mode

To Switch from Q Mode to A Mode

Displaying data stored in the built-in memory
When an SD Memory Card is inserted in the camera, images and 

movies on the SD Memory Card are displayed. If you want to display 

images and movies in the built-in memory, turn the camera off and 

remove the SD Memory Card, or follow the procedure below to use the 

“Built-in memory display” function.

 

Viewing images in the built-in memory while the SD Memory Card is 
inserted (built-in memory display)
• When you press and hold down the Q button for more than 1.2 seconds 

in A mode or while a menu is being displayed, the lens is retracted. After 
the message [Plays back stored images in the built-in memory] appears, 
images and movies stored in the built-in memory are displayed.

• In the built-in memory display, you can play back still pictures (including 

enlarged display) (p.100, p.109) and movies (p.101), and switch between four-
image display, nine-image display, folder display, and calendar display (p.102).

• In the built-in memory display, you cannot delete data, delete a selection, 

display the Playback Mode Palette, or display the menu. If you want to 
perform any of these operations on images or movies in the built-in 
memory, do so after removing the SD Memory Card.

Make sure that the camera is turned off before inserting or removing 
the SD Memory Card.