Panasonic WV-CW964 ユーザーズマニュアル
-20-
Contact
Insert
Up
A
Approx.
3 mm {0.1"}
3 mm {0.1"}
Insert the wire until A position
and clamp the contacts.
and clamp the contacts.
Wire
Up
Contact
Wire
Approx.
3 mm {0.1"}
3 mm {0.1"}
Insert the wire until A position
and clamp the contacts.
and clamp the contacts.
Contact
Up
Wire
How to Assemble the Cable with the Accessory
Connector
Strip back the cable jacket approx. 3 mm {0.1"} and
separate the individual conductors.
Connector
Strip back the cable jacket approx. 3 mm {0.1"} and
separate the individual conductors.
Prepare the individual conductors for clamping. Use
MOLEX band tool part number 57027-5000 (for UL-
Style Cable UL1015) or 57026-5000 (for UL-Style
UL1007) for clamping the contacts.
After clamping the contacts, push them into the proper
holes in the accessory connector of this camera until
they snap in place.
MOLEX band tool part number 57027-5000 (for UL-
Style Cable UL1015) or 57026-5000 (for UL-Style
UL1007) for clamping the contacts.
After clamping the contacts, push them into the proper
holes in the accessory connector of this camera until
they snap in place.
Cautions:
• Shrinking the cable-entry seal is a one-time
procedure. Do not shrink the cable-entry seal until
ascertaining that the unit is functioning.
ascertaining that the unit is functioning.
• CONNECT THIS TO 24 V AC CLASS 2 POWER
SUPPLY ONLY.
WV-CW964 05.10.18 11:09 AM ページ20