Panasonic DMC-LX2 操作ガイド
Preparation
20
VQT0Y44
Setting Date/Time (Clock Set)
n
Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
shipped. When you turn the camera on, the
following screen appears.
A
: [MENU/SET] button
B
: Cursor buttons
1
Press [MENU/SET].
2
Press e/r/w/q to select the date
and time.
C
: Time at the home area
D
: Time at the travel destination (P72)
• w/q : Select the desired item.
• e/r : Set date and time.
• Refer to [WORLD TIME] (P72) for
information about setting the local time at
the travel destination area.
the travel destination area.
• You can press [A] to cancel the operation
without setting the clock.
3
Press [MENU/SET] several times
to close the menu.
to close the menu.
• You can also press the joystick to close
the menu.
• Turn the camera off after finishing setting
the clock. Then turn it on and check that
the clock setting is correct.
the clock setting is correct.
1
Press [MENU/SET].
2
Press e/r to select [CLOCK SET] (P93).
3
Press q and perform the above steps 2
and
3 for setting.
• You can set the clock from the setup
menu (P21) while in playback mode [Q].
• You can use both the cursor buttons and
joystick for this operation.
• When a fully charged battery has been
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed.
setting is stored (in the camera) for at
least 3 months even if the battery is
removed.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• If you do not set the date, the date cannot
be printed when you go to a photo studio
for digital printing. (P100)
for digital printing. (P100)
A
B
MENU
2006
JAN 1
0 00
C
D
CLOCK SET
SELECT
SET
EXIT
CANCEL
D
M
Y
:
:
:
.
.
or
Changing the clock setting
MENU
4/4
REC
SELECT
EXIT
CLOCK SET