Panasonic DMC-LX2 操作ガイド
Advanced
43
VQT0Y44
Taking Pictures using the Built-in Flash
n
To open the flash
Slide the [< OPEN] switch
A
.
B
: Photo flash
• Do not cover the photo flash with your
fingers or any other items.
n
To close the flash
Press the flash until it clicks.
• To close the flash securely, press the
center of the flash until it clicks. When you
press on the edge, locking the flash may
become difficult.
press on the edge, locking the flash may
become difficult.
• Be sure to close the flash when not in use.
• The flash setting is fixed to Forced OFF
• The flash setting is fixed to Forced OFF
[v] while the flash closes.
n
Switching to the appropriate flash
setting
setting
Set the flash setting of the built-in flash
according to the scene to be recorded.
according to the scene to be recorded.
1
Press q [<].
2
Press e/r or q [<] to switch the
flash setting.
• When 5 seconds pass without any
operation, the setting selected at the time
is automatically adopted.
is automatically adopted.
• For the flash setting contents, refer to
“Flash setting” (P44). For the selectable
flash setting, refer to “Available flash
settings by recording mode” (P44).
flash setting, refer to “Available flash
settings by recording mode” (P44).
3
Press [MENU/SET].
• You can also press the shutter button
halfway to finish.
• You can also use the joystick for
performing steps
2 and 3.
A
B
MENU
FLASH
SELECT
SET
AUTO
AUTO/RED-EYE
FORCED FLASH ON
SLOW SYNC./RED-EYE
MENU
FLASH
SELECT
SET
AUTO
AUTO/RED-EYE
FORCED FLASH ON
SLOW SYNC./RED-EYE
or
To select
To set