Nikon COOLPIXS31BLUE ユーザーズマニュアル
E
64
Re
fere
nce
S
S
ecti
on
Error Messages
Display
Cause/Solution
A
O
(flashes)
(flashes)
Clock not set.
Set date and time.
Set date and time.
Battery exhausted.
Charge or replace the battery.
Battery temperature
high
high
Battery temperature is high.
Turn off camera, and allow battery to cool down before
resuming use. After five seconds, the monitor will turn off
and the power-on lamp will begin flashing quickly. After the
lamp flashes for three minutes, the camera will turn off
automatically. Pressing the power switch also turns off the
camera.
Turn off camera, and allow battery to cool down before
resuming use. After five seconds, the monitor will turn off
and the power-on lamp will begin flashing quickly. After the
lamp flashes for three minutes, the camera will turn off
automatically. Pressing the power switch also turns off the
camera.
Battery temperature is
elevated. The camera
will turn off.
elevated. The camera
will turn off.
The battery has become hot.
The camera turns off automatically. Allow the battery to cool
down before turning it on again.
The camera turns off automatically. Allow the battery to cool
down before turning it on again.
The camera will turn off
to prevent overheating.
to prevent overheating.
Inside of the camera has become hot.
The camera turns off automatically. Allow the camera to cool
down before turning it on again.
The camera turns off automatically. Allow the camera to cool
down before turning it on again.
Please wait.
Wait until the image is saved and the message disappears
from the display.
from the display.
–
Memory card is write
protected.
protected.
Write-protect switch is in “lock” position.
Slide write-protect switch to “write” position.
Slide write-protect switch to “write” position.
–