Nikon 13187 ユーザーガイド
143
l
l
Flash Photography
The built-in flash has a Guide Number (GN) 12/39 (m/ft, ISO 100, 20 °C/68 °F) and
provides coverage for the angle of view of 24 mm lens, or a 16 mm lens in DX format.
It can be used not only when natural lighting is inadequate but to fill in shadows and
backlit subjects or to add a catch light to the subject’s eyes.
provides coverage for the angle of view of 24 mm lens, or a 16 mm lens in DX format.
It can be used not only when natural lighting is inadequate but to fill in shadows and
backlit subjects or to add a catch light to the subject’s eyes.
❚❚Using the Built-in Flash: i, k, p, n, o, s, and w Modes
1
Choose a flash mode (
0 144).
2
Take pictures.
The flash will pop up as required when the
shutter-release button is pressed halfway, and fire
when a photograph is taken. If the flash does not
pop up automatically,
shutter-release button is pressed halfway, and fire
when a photograph is taken. If the flash does not
pop up automatically,
DO
NOT
attempt to raise it by
hand. Failure to observe this precaution could
damage the flash.
damage the flash.
❚❚Using the Built-in Flash: P, S, A, M, and 0 Modes
1
Raise the flash.
Press the
M (Y) button to raise the flash.
2
Choose a flash mode (P, S, A, and M modes
only;
only;
3
Take pictures.
The flash will fire whenever a picture is taken.
Using the Built-in Flash
A
Metering
Select matrix or center-weighted metering to activate i-TTL balanced fill-flash for digital SLR.
Standard i-TTL flash for digital SLR is activated automatically when spot metering is selected.
Standard i-TTL flash for digital SLR is activated automatically when spot metering is selected.
M (Y) button