Canon DC310 ユーザーズマニュアル
68 •
Additional Information
Even without a disc loaded, when
closing the disc compartment cover a
motor sound can be heard.
closing the disc compartment cover a
motor sound can be heard.
- The camcorder is checking if a disc is
loaded or not. This is not a malfunction.
Cannot open the disc cover to remove
the disc.
the disc.
- Turn off the camcorder, disconnect the
compact power adapter and remove
the battery pack. Restore the power
supply and try again.
the battery pack. Restore the power
supply and try again.
- The camcorder has exceeded its
operational temperature. Turn off the
camcorder and let it cool down before
resuming use.
camcorder and let it cool down before
resuming use.
The disc cannot be recognized.
- The disc is dirty. Clean the disc with a
soft lens-cleaning cloth (
74). If the
problem persists replace the disc.
- The disc is not correctly loaded. Check
the disc (
23).
- Verify that the camcorder supports the
type of DVD disc you inserted (
The camcorder vibrates.
- Depending on the condition of the disc,
the camcorder might vibrate
occasionally. This is not a malfunction.
occasionally. This is not a malfunction.
•
The disc’s rotation can be faintly heard.
•
Occasionally the operation sound can
be heard.
- The disc is activated from time to time.
This is not a malfunction.
•
After using the camcorder for a long
time, it becomes hot.
•
lights up in red.
- This is not a malfunction. Turn the
camcorder off and let it cool for a while
before resuming operation.
before resuming operation.
Recording
Image will not appear on the screen.
- Set the camcorder to
mode (
- Open the lens cover.
Pressing
will not start
recording.
- Set the camcorder to
mode (
26).
- Load a disc that has been tested
(
4).
- The disc is full (“
END” appears on
the screen). Delete some recordings
(DVD-RW in VR mode) to free some
space (
(DVD-RW in VR mode) to free some
space (
33) or replace the disc.
- The camcorder has exceeded its
operational temperature. Turn off the
camcorder and let it cool down before
resuming use.
camcorder and let it cool down before
resuming use.
- Unfinalize (
46) the disc (DVD-RW in
VIDEO mode).
Even after stopping recording, the disc
access indicator does not go off.
access indicator does not go off.
- The scene is being recorded on the
disc. This is not a malfunction.
The point where
was pressed
does not match the beginning/end of the
recording.
recording.
- There is a slight interval between
pressing
and the actual start
of the recording on the disc. This is not
a malfunction.
a malfunction.
The recording suddenly stops shortly
after starting recording.
after starting recording.
- The disc is dirty. Clean the disc with a
soft lens-cleaning cloth (
74). If the
problem persists replace the disc.
- The camcorder has exceeded its
operational temperature. Turn off the
camcorder and let it cool down before
resuming use.
camcorder and let it cool down before
resuming use.
Camcorder will not focus.
- Autofocus does not work on that
subject. Focus manually (
38).
- If you are using the viewfinder, adjust it
with the dioptric adjustment lever
(
(
- Lens is dirty. Clean the lens with a soft
lens-cleaning cloth (
74). Never use
tissue paper to clean the lens.
Sound is distorted.
- When recording near loud sounds (such
as fireworks or concerts), sound may
become distorted.
become distorted.
A vertical light bar appears on the
screen.
screen.
- Bright light in a dark scene may cause a
vertical light bar (smear) to appear. This
is not a malfunction.
is not a malfunction.
Start/Stop
Start/Stop
Start/Stop
CO
PY