Canon HF S10 ユーザーズマニュアル

Additional Information

Š

The camcorder is connected using the optional HTC-100 HDMI Cable, but there is no picture or 
sound from the HDTV.

- Disconnect the HTC-100 HDMI Cable and then restore the connection or turn the camcorder 

off and then on again.

The camcorder is connected using the optional HTC-100 HDMI Cable, but HDMI-CEC does not 
work (cannot play back using the TV's remote control).

- Disconnect the HTC-100 HDMI cable and turn off the camcorder and the TV. After a short 

while turn them on again and restore the connection.

-

 

 [Control for HDMI] is set to [Off]. Set it to [On] (

- HDMI-CEC is not activated on the connected TV. Activate this function on the TV.
- Even with TV sets compatible with HDMI-CEC the range of functions available differs depend-

ing on the type of TV. Refer to the instruction manual of the connected TV.

The computer doesn't recognize the camcorder even though the camcorder is connected 
correctly.

-

 

or 

 

 [USB Connection Type] is set to [DVD Burner]. Set it to [Computer/Printer] or 

to [Connect and Set] (

146).

- Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again and 

restore the connection.

- Connect the camcorder to a different USB port on the computer.

The printer is not working even though the camcorder and printer are connected correctly.

-

 

or 

 

 [USB Connection Type] is set to [DVD Burner]. Set it to [Computer/Printer] or 

to [Connect and Set] (

146).

- Disconnect the USB cable and turn off the printer. After a short while turn it on again and 

restore the connection.

The camcorder doesn't recognize the DW-100 DVD Burner even though it is connected 
correctly.

-

 

or 

 

 [USB Connection Type] is set to [Computer/Printer]. Set it to [DVD Burner] or 

to [Connect and Set] (

146).

List of Messages

Following the list of messages for the camcorder you can find separate 
lists for print-related messages (

only when using the optional DW-100 DVD Burner (

Access error

- There was an error when reading the memory or attempting to write onto it.
- This message can also appear if condensation has formed (

172). Wait until the cam-

corder dries completely before resuming use.

 

(in alphabetical order)

COP

Y