Kodak Z712 ユーザーズマニュアル

 51

Picture is too light

■

Reposition camera to reduce the amount of available light.

■

Turn flash off (

).

■

Move so that the distance between you and the subject is within the 
effective flash range (

■

To automatically set exposure and focus, press the Shutter button 
halfway. When the AF/AE indicator turns green, press the Shutter 
button completely down to take the picture.

■

If using P, A, or S mode, adjust Exposure compensation (

Picture is not clear

■

To automatically set exposure and focus, press the Shutter button 
halfway. When the AF/AE indicator turns green, press the Shutter 
button completely down to take the picture.

■

Clean the lens (

).

■

Make sure camera is not in Close-up/Macro mode if you are more 
than 27.6 in. (70 cm) from your subject. (Move further away if you 
are using the zoom lens in Close-up/Macro.)

■

Place the camera on a flat, steady surface or use a tripod, especially 
in high-zoom settings or in low light.

Cannot locate desired picture.

■

Turn on the camera. Make sure the camera is 
accessing internal memory/card or Favorites.

■

If you are using Direct print, use the menu to change 
the image storage location.

The Direct print menu interface 
turns off.

Press any button to redisplay the menu.

Cannot print pictures.

■

Ensure that there is a connection between camera 
and printer (

■

Ensure the printer and camera have power.