KYOCERA Finecam L4 ユーザーズマニュアル

● This camera is not designed to be waterproof, and cannot be used in the rain or under water. If the camera 

should inadvertently be exposed to water, it should be taken quickly to a Kyocera/Yashica Service Center 
for inspection.

● Fingerprints or smudges on the camera’s lens or light sensors may adversely affect the precision of the 

camera. If soiling occurs, use a piece of clean chamois or commercially available lens tissue to gently wipe 
away the smudge. Do not apply excessive pressure or touch the lens with any rough material. An air 
blower or lens brush may be used to remove loose dust or dirt from the lens.

● Clean the camera body by wiping with soft cloth. Never use benzene, thinner, or other volatile solvents or 

cleansers, since such substances will damage the body materials.

● Do not remove the Memory Cards while the card access LED is flashing. 

These Operating Instructions feature the following caution and warning symbols to indicate items of 
special importance. Be sure to read the contents of these warnings carefully, and use the features 
correctly.

● If camera or batteries become hot, emit smoke or a burning smell, or display other 

abnormal symptoms, remove them from the camera immediately to prevent fire. When 
handling the batteries, take precautions to avoid being burned.

● Never attempt to disassemble or modify the camera, since you may receive a severe 

electric shock.

● Do not operate the electronic flash at close proximity to a person's eyes (especially 

those of an infant), since eye damage may result.

● Do not look through the camera directly at the sun or other strong light source, since 

your eyesight may be damaged.

● Do not attempt to take pictures while driving or walking, particularly when looking 

through the viewfinder or at the LCD monitor, since you may cause an accident.

● When taking pictures, remain aware of your surroundings and what is happening 

around you.

● Clean the camera well after using it at the beach or other locations subject to large 

concentrations of sand or dust. Salt air may promote corrosion of metal components 
and damage or short circuits in electronic parts, causing the camera to emit smoke or 
catch fire. Sand inside the camera may result in internal damage and operating 
malfunctions.

● If the camera is brought quickly from a cold place to a warm room, condensation may 

form on the lens and internal parts. Such condensation may result in damage or short 
circuits in electronic parts, causing the camera to emit smoke or catch fire. Whenever 
possible, avoid subjecting the camera to sudden changes in temperature, and if 
condensation occurs, turn off the camera power quickly and leave it off until all 
condensation is gone.

● This camera is a precision electronic instrument, and should be protected from 

impacts and falls that might cause damage to internal parts or the shorting of circuitry.

● When taking the camera overseas or using it to record important events, check its 

operating condition and take test pictures beforehand to confirm proper operation.

This symbol indicates procedures which have a high likelihood of resulting in death or 
serious personal injury if not followed properly.

This symbol indicates handling procedures which may result in death or personal injury 
if not followed properly.

This symbol indicates procedures which may result in injury to the user, or physical 
damage to the product if not followed properly.

00_8CQ.book  Page 8  Wednesday, May 14, 2003  8:10 PM