MINOLTA Dimage 5 概要
127
126
DATA-TRANSFER MODE
CONNECTING TO WINDOWS 98
Choose the recommended search for a
suitable driver. Click “Next.”
suitable driver. Click “Next.”
Choose to specify the location of the dri-
ver. The browse window can be used to
indicate the driver location. When the
location is shown in the window, click
“Next.”
ver. The browse window can be used to
indicate the driver location. When the
location is shown in the window, click
“Next.”
• The driver should be located in the CD-
ROM drive at :\Win98\USB.
The driver needs only to be installed once. If the driver cannot be installed automatical-
ly, it can be installed manually with the operating system’s add-new-hardware wizard;
see the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, inset it into the CD-ROM drive and follow the
accompanying instructions on the screen.
ly, it can be installed manually with the operating system’s add-new-hardware wizard;
see the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, inset it into the CD-ROM drive and follow the
accompanying instructions on the screen.
Before connecting the camera to the
computer, place the DiMAGE soft-
ware CD-ROM in the CD-ROM
drive. The DiMAGE installer menu
should automatically activate. To
automatically install the Windows 98
USB driver, click on the starting-up-
the-USB-device-driver-installer but-
ton. A window will appear to confirm
that the driver should be installed;
click “Yes” to continue.
computer, place the DiMAGE soft-
ware CD-ROM in the CD-ROM
drive. The DiMAGE installer menu
should automatically activate. To
automatically install the Windows 98
USB driver, click on the starting-up-
the-USB-device-driver-installer but-
ton. A window will appear to confirm
that the driver should be installed;
click “Yes” to continue.
When the driver has been success-
fully installed, a
window will
appear. Click
“OK.” The cam-
era can now be
attached to the
computer (p. 124).
fully installed, a
window will
appear. Click
“OK.” The cam-
era can now be
attached to the
computer (p. 124).
AUTOMATIC INSTALLATION
MANUAL INSTALLATION
To install the Windows 98 driver manually, follow the instruction in the connecting-the-
camera-to-a-computer section on page 124.
camera-to-a-computer section on page 124.
When the camera is plugged into the com-
puter, the operating system will detect the
new device and the add-new-hardware-
wizard window will open. Place the
DiMAGE software CD-ROM in the CD-
ROM drive. Click “Next.”
puter, the operating system will detect the
new device and the add-new-hardware-
wizard window will open. Place the
DiMAGE software CD-ROM in the CD-
ROM drive. Click “Next.”
(Continued on the next page)