Canon CDI-E067-010 ユーザーズマニュアル

146

Print Settings (DPOF Print Settings) (continued)

3

Select images for printing.

Single Images
• When the print type (p. 147) is set to [Standard] or

[Both], select an image using the main dial or the 

B

or

A arrow on the omni selector. You can set the

number of copies (up to 99) to be printed using the

C or D arrow on the omni selector.

• When the print type (p. 147) is set to [Index], select

an image using the main dial or the 

B or A arrow

on the omni selector and mark or remove marks
from images using the

C or D arrow on the omni

selector.

• You can use the same procedures to select images in

index replay (3 images). Press the   button to
switch between single replay and index replay.

All the Images on a CF Card
• Press the   button to switch to index replay (three

images).

• You can set one copy of each image to print by

pressing the 

 button, then selecting [Mark all]

using the

C or D arrow on the omni selector, and

pressing the 

 button again.

• When the print type is set to [Standard] or

[Both], the setting for the number of print copies
can be changed for each image. When [Index] is
selected, the print settings can be deleted. For
the instructions on changing settings, please
reread Step 3 from the beginning.

• You can cancel all the settings by selecting [Clear all].

4

Press the 

 button.

• The selection mode will turn off and the Print Order menu will reappear.

Number of Copies