Concord Camera 4363z ユーザーズマニュアル

10

About Flash Ready LED
                 

Note: Do not power the camera off or change camera mode while the camera is capturing or storing a picture 
or video clip. Otherwise, the picture or video clip may be corrupted.

                                      

1.   Set the camera to (      ) camera mode.
2.   Frame the subject in the LCD. (fig.1.1)
3.  Press the shutter button half-way to activate the auto-focus lock until the green AF LED stops blinking and 

the AF frame turns green. (fig.1.2)
•   The camera will automatically determine the best focus, and a rapid click sound can be heard. 

      Note: For more information on Focus Lock, please go to p. 11. To change AF mode, please refer to p. 24.
4.  Press the shutter button fully to capture the image. (fig.1.3)

•   The camera will make a click sound.
•   The camera will beep when the image is captured.
•   When the image has been captured, the Flash Ready LED next to the viewfinder will blink to indicate that 

the image is being stored.

•   A preview of the image will be displayed on the LCD for a second. To change the preview interval, please 

refer to p.42. 

•   The picture counter number displayed in the LCD will be updated.

5.   If you are not satisfied with the image, you may simply press (      ) button to delete the image before it is 

saved. For details, please refer to p.30.

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

Steady
The camera is 
capturing a video clip.

Blinking
The flash is recharging, or 
LCD is auto powered off.

TAKING A PICTURE

3

M

28/45

5

10

30

2

 fig. 1.1

fig. 1.2

fig. 1.3

 

⁄   ⁄ 

 

⁄   ⁄ 

4

M

28/45

4

M

28/45

 

⁄   ⁄ 

 

⁄   ⁄ 

DZ4363 UG(514338-02)-E   10

6/15/04, 5:33:42 PM