Concord Camera 5040 ユーザーズマニュアル

25

The camera allows you to view individual files on the television. To begin, check your television 
documentation to determine what video standard you should set your camera to.

Japan, U.S.A., Canada, etc.

Europe, Asia (excluding Japan), Oceania, etc.

Setting Video Output Signal Mode
1.  Press MENU button.
2.  Press     to select Setup Menu.
3.  Press the  

  or  

  to highlight TV Output, then press the SET or   to enter its submenu.

4.  Press the  

  or  

  to select NTSC or PAL.

5.  Press SET button to confirm

Connecting the camera with your TV set
1.  Turn off the camera.
2.  Plug one end of the supplied TV Out Cable to the video-in 

jack on the TV.

3.  Plug the other end of the TV Out Cable to the TV OUT 

terminal on the camera.

4.  Turn on the TV and switch it to VIDEO mode.
5.  Turn on the camera.
     Everything that would normally appear on the camera’s 

LCD will appear on the TV. The camera’s LCD turns off 
automatically during video output.

6.  When the camera is connected with the TV, you can refer 

the instruction above to use the TV screen as the camera’s 
LCD to do things such as, to taking pictures, to taking video 
clips and to view the files. 

Download files taken with the camera to a computer in one of the following ways:

1.  Using an SD card reader.
2.  Connect the camera to a computer with the USB cable.

Downloading files by using card reader
1.  Remove the SD card from the camera, and insert it into an 

SD card reader. 

2.  Connect the SD card reader to the computer.
3.  Double-click the icon of the drive with the SD card.
4.  Copy images from the card into a folder of your computer.

MAKING CONNECTIONS