AGFA DC-533 ユーザーズマニュアル
- 41 -
File Naming
File name begins with “DSCI” and are followed by a 4-digit number that increases in
sequence. File numbering starts from 0001 when a new folder is created.
If the highest folder number is 999 and highest file number exceeds 9999, the camera will
display the warning message “Folder cannot be created”. When it appears, try one of the
following ways:
Reset the file number and plug in a new memory card.
Format the memory. The folder number and file number are initialized and renumbered
Format the memory. The folder number and file number are initialized and renumbered
from 100 and 0001 respectively.
Setting the TV Out
Your camera can be connected to a TV allowing you to preview images and movie clips on the
television screen. TV Out should be set to either NTSC or PAL depending on your region.
Option
Description
NTSC
America, Japan, Taiwan, Korea
PAL
All of Europe
Setting USB Port
You can set USB mode to connect the camera with a printer or computer.
Option
Description
Computer
To connect your camera to a PC.
Printer
To connect your camera to a printer.
NOTE:
Do not change the folder and file names in the memory card using your computer. It may
be unable to playback the data using the digital camera.