Canon S900 ユーザーズマニュアル
6
Basic Printing
The S900 photo printer can print on paper ranging
from standard copier paper (usually 17–28 lb.) to
Canon specialty media paper and envelopes.
from standard copier paper (usually 17–28 lb.) to
Canon specialty media paper and envelopes.
The paper thickness lever is located inside the
front cover, on the printhead holder. It controls the
paper feed for the type and weight of the media on
which you are printing.
front cover, on the printhead holder. It controls the
paper feed for the type and weight of the media on
which you are printing.
Use the chart on the previous page to ensure that
the paper thickness lever is set correctly for the
type of Canon media you are using.
the paper thickness lever is set correctly for the
type of Canon media you are using.
To load plain paper or other Canon media:
1.
Make sure the paper thickness lever is set
correctly for the media used.
correctly for the media used.
2.
Pinch and slide the paper guide completely to
the left.
the left.
3.
Fan the edges of the sheets to remove static
cling and avoid paper jams, then tap the edges
of the stack against a flat surface so the stack
is aligned.
cling and avoid paper jams, then tap the edges
of the stack against a flat surface so the stack
is aligned.
4.
Insert the media into the paper rest, with the
print side facing up.
print side facing up.
Some specialty media have specific sides for printing. The print
side is usually the brighter white or glossier side of the page.
When using specialty media, ensure that the brighter/glossier
side faces up and avoid touching the print side.
side is usually the brighter white or glossier side of the page.
When using specialty media, ensure that the brighter/glossier
side faces up and avoid touching the print side.
Always follow the specific media instructions packaged with
your media for complete details and ink drying times.
your media for complete details and ink drying times.
5.
Slide the paper guide right to the edge of the media until firmly in place.
To load envelopes:
1.
Lift the cover and set the paper thickness lever to the envelope mark. Close
the cover.
the cover.
2.
Pinch and slide the paper guide to the left.
Load limit mark
Print side
S900_QSG.book Page 6 Friday, November 2, 2001 1:34 PM