Nikon 900ED ユーザーズマニュアル

Nikon Scan software (provided) is required to control the scanner.  The installation instructions 
that follow are divided into Windows and Macintosh sections.

Turn the computer on and wait for Windows to start up.  Before continuing with installation, 
make sure that:
• The scanner is 

NOT

 connected

• No other applications (including anti-virus software) are running
• The computer satisfi es the following system requirements:

300 MHz Pentium or better

Preinstalled versions of Windows XP, Windows 2000 Professional, Windows Me, 
Windows 98 SE

128 MB  or more (512 MB or more recommended)

A minimum of 40 MB required for installation (200 MB or more recommended), with 
an additional 200 MB of free disk space available while Nikon Scan is running

800 × 600 pixels or more with 16-bit color (High Color) or more

Only OHCI-compliant boards supported

CD-ROM drive required for installation

* More memory may be required depending on fi lm type, scan size, resolution, bit depth, the number of 

scans performed in each session, the adapter used, and on whether Digital ROC, Digital GEM or Digital 
DEE is used.  A system with more than the minimum amount of memory is recommended.

† More free disk space may be required depending on the fi lm type and number of frames.  Nikon recom-

mends having as much free disk space as possible when running Nikon Scan.

‡ If the computer is not already equipped with an IEEE 1394 (Firewire) interface, install an approved 

OHCI-compliant IEEE 1394 interface board or card (for a list of approved boards or cards, see the Nikon 
web site for your area; 

 2).  The IEEE 1394 interface board provided with the scanner can be installed 

in desktop computers with an empty PCI slot (

 64).  Note that the supplied board can not be installed 

in laptop computers or low-profi le PCI slots.

Before installing Nikon Scan on a computer running Windows 98 SE, be sure to update the 
IEEE 1394 drivers  (

 65).

When installing 

or uninstalling 

Nikon Scan under the above operating systems, log in as the “Computer 

administrator” (Windows XP) or “Administrator” (Windows 2000 Professional).

Before installing Nikon Scan 4, uninstall any earlier versions of Nikon Scan.  See “Uninstalling Nikon 
Scan” (

 70).

For information on installing and using Nikon View, see the Nikon View Reference Manual (on CD).