Panasonic AWRP120GJ ユーザーズマニュアル
50
Setting user authentication
To control remote cameras that have the user authentication function enabled, you need to set the user name and password on the AW-RP120.
Configure this setting on the “User Auth.” tab of this application.
1 .
Enter the user name in the User Name
box .
2 .
Enter the password in the Password box .
Entered characters are displayed as “*”.
3 .
Enter the same password as above in the
Retype password box .
Entered characters are displayed as “*”.
4 .
Click [SET] .
The user name and password are set on
AW-RP120.
Clicking [REFRESH] clears the user name
and password .
Setup Software
(continued)