Panasonic AW-PB506AL ユーザーズマニュアル
- 7 (E) -
Installing the SDI card
Always ask your local dealer to install the SDI card.
Rear panel
Optional card
slot cover
4 screws (8 mm)
2 screws (6 mm)
SDI card
1
Turn the power to the camera off
and remove any cables which are
connected to the power connector or
other connectors.
connected to the power connector or
other connectors.
2
Loosen the 4 screws (8 mm) on the
rear panel of the camera, then remove
the panel itself.
the panel itself.
3
Loosen the screws (6 mm) on the
optional card slot cover, then remove
the cover.
the cover.
4
Align the SDI card with the guides and
insert it.
Ensure the card is fully inserted.
insert it.
Ensure the card is fully inserted.
5
Firmly tighten the screws (6 mm) to
the optional card slot.
6
Firmly secure the rear panel with the
4 screws (8 mm).
4 screws (8 mm).
Note
If the screws are misplaced, use
the extra screws supplied with this
product.
product.
Before installing the SDI card:
Release the static carried in the body of the person to perform the installation.
Release the static carried in the body of the person to perform the installation.
Installation can be performed more safely if an anti-static wrist strap is worn.
Touching the card without first releasing this static may cause malfunctioning.
Touching the card without first releasing this static may cause malfunctioning.
Do not allow the metal part of the card come in contact with any other metal parts.