Nikon 4804 ユーザーズマニュアル
122
3
Notes on continuous flash operation (in close-up flash operation (using cords))
Max. number of continuous firings
Synchronization during continuous flash operation
It is possible to take up to the number of frames during continuous operation as
shown in the table below.
SB-R200’s maximum number of frames during continuous flash
operation (at six frames per sec.)
operation (at six frames per sec.)
Flash mode
Max. number of continuous
firings (at 6 frames/sec.)
firings (at 6 frames/sec.)
TTL auto flash
15
Manual flash (Flash output level: M1/1, M1/2)
Manual flash (Flash output level: M1/4 to M1/64)
Manual flash (Flash output level: M1/4 to M1/64)
30
Flash output level
1/8
1/16
1/32
1/64
Up to 4
Up to 8
Up to 16
Up to 30
WARNING
Do not exceed the maximum number of continuous
firings
firings
You should allow the Speedlight to cool off for at least
10 minutes after the maximum number of continuous
firings are performed as shown in the table below: