Ricoh GR Digital III ユーザーズマニュアル
144
C
OP
YING
P
IC
TUR
ES
ES
TO
A
C
OMPUT
ER
Copying Pictures Using DL-10
After installing DC software, follow the steps below to
copy pictures to your computer.
copy pictures to your computer.
1
Turn the camera off.
2
Connect the supplied USB cable.
Connect the cable to the com-
puter USB port.
puter USB port.
Caution
Do not use force when connecting
the cable or when handling the
camera with the cable connected.
the cable or when handling the
camera with the cable connected.
Connect the cable to the cam-
era as shown. The camera will
turn on, DL-10 will start, and
transfer will begin automatically. Pictures are copied
to folders in the “Digital Camera” folder in “My Docu-
ments” (if you were previously using Caplio software,
pictures will instead be copied to folders in the “Ca-
plio” folder). Pictures are sorted into separate folders
by date of recording; make sure the camera clock is
set to the correct date and time before shooting.
era as shown. The camera will
turn on, DL-10 will start, and
transfer will begin automatically. Pictures are copied
to folders in the “Digital Camera” folder in “My Docu-
ments” (if you were previously using Caplio software,
pictures will instead be copied to folders in the “Ca-
plio” folder). Pictures are sorted into separate folders
by date of recording; make sure the camera clock is
set to the correct date and time before shooting.
3
Disconnect the cable when transfer is complete.
See page 147 for more information.
Note
If transfer does not begin automatically, click Save in the DL-10
window. Alternatively, check that Saves automatically when
connected to USB is selected in the DL-10 “Option Settings” dia-
log, then restart the computer and repeat the above steps.
window. Alternatively, check that Saves automatically when
connected to USB is selected in the DL-10 “Option Settings” dia-
log, then restart the computer and repeat the above steps.