Panasonic NV-GS27EB ユーザーズマニュアル
Others
40
LSQT1006
Warning/alarm indications
If any one of the following indications lights up or
flashes, please check the movie camera.
Confirmatory indications
Y: A cassette with the accidental erasure
flashes, please check the movie camera.
Confirmatory indications
Y: A cassette with the accidental erasure
prevention slider placed in the [SAVE]
position is inserted.
No cassette is inserted.
position is inserted.
No cassette is inserted.
[--]/
0:
The built-in battery is low.
-10-
°: The warning/alarm indication appears when
you record yourself. Turn the LCD monitor
towards the viewfinder and check the
warning/alarm indication.
towards the viewfinder and check the
warning/alarm indication.
REMOTE :
An incorrect remote control mode has been
selected.
selected.
-19-
2END:
The tape came to the end during recording.
:: The video heads are dirty.
-45-
Textual indications
3DEW DETECT/3EJECT TAPE:
3DEW DETECT/3EJECT TAPE:
Condensation has occurred. Take out the
cassette and wait for a while. It takes some
time until the cassette holder opens, but this
is not a malfunction.
cassette and wait for a while. It takes some
time until the cassette holder opens, but this
is not a malfunction.
-45-
LOW BATTERY:
The battery is low. Recharge it.
-8-
NO TAPE :
No tape is inserted.
-13-
TAPE END:
The tape came to the end during recording.
CHECK REC TAB:
You are attempting to record pictures on a
tape with the accidental erasure prevention
slider placed in the [SAVE] position.
You are attempting audio dubbing or digital
dubbing on a tape with the accidental
erasure prevention slider placed in the
[SAVE] position.
tape with the accidental erasure prevention
slider placed in the [SAVE] position.
You are attempting audio dubbing or digital
dubbing on a tape with the accidental
erasure prevention slider placed in the
[SAVE] position.
CHECK REMOTE MODE:
An incorrect remote control mode has been
selected. This is only displayed at the first
operation of the remote control after
powering-on.
selected. This is only displayed at the first
operation of the remote control after
powering-on.
-19-
WRONG TAPE FORMAT:
You are attempting to play back a tape
section that has been recorded with a
different TV system. This cassette is
incompatible.
section that has been recorded with a
different TV system. This cassette is
incompatible.
CLOSE CASSETTE DOOR:
The cassette cover is open. Close the
cassette cover.
cassette cover.
-13-
UNABLE TO A.DUB (LP RECORDED):
Audio dubbing cannot be performed
because the original recording was in LP
mode.
because the original recording was in LP
mode.
UNABLE TO A.DUB:
You are attempting to perform audio
dubbing on a non-recorded tape.
dubbing on a non-recorded tape.
COPY PROTECTED:
Images cannot be recorded correctly
because the medium is protected by a copy
guard.
because the medium is protected by a copy
guard.
NEED HEAD CLEANING:
The video heads are dirty.
-45-
PUSH THE RESET SWITCH:
An irregularity in the equipment has been
detected. Press the [RESET] button (
detected. Press the [RESET] button (
-6-
).
This may solve the problem.
DISCONNECT USB CABLE:
You are attempting to record pictures on a
tape with the USB cable connected to the
movie camera.
tape with the USB cable connected to the
movie camera.
PC DOES NOT SUPPORT USB2.0:
The movie camera is connected to a
personal computer that does not support
USB 2.0. (Refer to the operating instructions
for PC connection.)
personal computer that does not support
USB 2.0. (Refer to the operating instructions
for PC connection.)
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM]
setting during MotionDV Mode.
setting during MotionDV Mode.
REVERSE THE LCD MONITOR:
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
TURN OFF THE VIDEO LIGHT:
You are attempting to select an item in
[SCENE MODE] when light is on.
[SCENE MODE] when light is on.
CANCEL NIGHT VIEW MODE:
You are attempting to select an item other
than [OFF] in [SCENE MODE] during night
view mode.
than [OFF] in [SCENE MODE] during night
view mode.
LSQT1006ENG.book 40 ページ 2005年12月9日 金曜日 午前11時17分