Panasonic SV-AV100 ユーザーズマニュアル

ページ / 100
TV
≥When the SD Video Camera is turned on, 
do not attach or remove the battery, or 
plug the power cord in or out.
Cradle (
13)
≥To fit the SD Video Camera on the AV 
Cradle, turn the SD Video Camera [OFF].
≥When the SD Video Camera is connected 
to the AV Cradle, the SD Video Camera 
cannot record through-the-lens images.
≥When the AC adaptor is connected to this 
SD Video Camera, the SD Video Camera 
cannot be fitted on the AV Cradle.
≥An SD Memory Card can be used for this 
SD Video Camera.
≥While the Card Access Lamp [ACCESS] is 
on, the following operations should not 
be attempted: (Such action will damage 
the Memory Card, cause loss of recorded 
data and cause the SD Video Camera to 
malfunction.) 
-Remove or insert the Memory Card.
-Remove the battery or unplug the power 
cable.
-Apply vibration or shock.
≥Close a Card Slot Cover after checking 
whether the Memory Card is inserted 
correctly.
≥Do not touch the terminals on the back of 
the Memory Card with your fingers. 
≥Electrical noise, static electricity or failure 
of the SD Video Camera or the Memory 
Card may damage the Memory Card or 
erase the data stored on the Memory 
Card. It is recommended to save 
important data onto a personal computer.
≥Some cards may pop out when they are 
removed.
≥Cannot guarantee the contents of 
recording when pictures are recorded on a 
MultiMediaCard.
≥Forcefully rotating the LCD Monitor 
beyond ranges described in these 
operating instructions will damage the SD 
Video Camera.
≥When the LCD Monitor is closed with its 
display section facing outward, operation 
with the Multi-function Button or [MENU] 
Button is disabled. You can perform the 
function such as playing back, recording 
and adjusting the volume, etc. with the 
remote controller.
17)
≥If the SD Video Camera is not used for 
5 minutes or longer, the power is 
automatically turned off. Set the Power/
Mode Switch to [OFF] and turn it back on.
≥While a Menu is displayed, you cannot 
record or play back. 
≥The menu screen does not appear during 
recording.
≥The built-in battery sustains the operation 
of the clock.
≥The clock might cause a deviation from 
the correct date and/or time, so be sure to 
check the current date and/or time before 
recording. 
≥If the [0] indicator is displayed, set the 
date and time after the battery has 
charged. (
66)
AV100PP.book  79 ページ  2003年8月22日 金曜日 午後4時30分