Panasonic SDR-SW20P ユーザーズマニュアル
21
VQT1M21
● SDHC Memory Cards can be used only with SDHC devices.
Be careful when sharing cards between devices.
● Be sure to format SD cards with this unit only.
If cards are formatted on a PC or other device, recording may take time and
Be careful when sharing cards between devices.
● Be sure to format SD cards with this unit only.
If cards are formatted on a PC or other device, recording may take time and
the card may become unusable with the unit.
● Before using an SD card from another device, copy the data onto a PC or
other storage device and then format the card with this unit.
● Keep the Memory Card out of reach of children to prevent swallowing.
● This unit supports SD Memory Cards formatted to FAT12 or FAT16 file
● This unit supports SD Memory Cards formatted to FAT12 or FAT16 file
systems and SDHC Memory Cards formatted to a FAT32 file system.
● SD speed Class 2
Class 2 speed standard for SD cards. This and higher types of SD cards
Class 2 speed standard for SD cards. This and higher types of SD cards
operate stably in devices for which Class 2 or higher SD cards are
recommended such as this unit.
recommended such as this unit.
Precautions in handling
• Do not touch the terminals on the back of the card. Also, prevent dirt, water
• Do not touch the terminals on the back of the card. Also, prevent dirt, water
and foreign matter from adhering to terminals.
• Do not leave cards in the following areas:
· Where exposed to direct sunlight
· Humid or dusty places
· Near heaters and sources of heat
· Where subjected to sharp temperature changes (condensation can occur)
· Where exposed to static electricity or electromagnetic waves
• After use, return cards to their pouch or case.
• SD card data may be corrupted or lost due to electrical noise, static
· Where exposed to direct sunlight
· Humid or dusty places
· Near heaters and sources of heat
· Where subjected to sharp temperature changes (condensation can occur)
· Where exposed to static electricity or electromagnetic waves
• After use, return cards to their pouch or case.
• SD card data may be corrupted or lost due to electrical noise, static
electricity, damage to the unit or card, etc. Save important data on a PC
using the supplied USB cable, MotionSD STUDIO, etc. (P.76)
using the supplied USB cable, MotionSD STUDIO, etc. (P.76)
Write-protecting cards
When the write-protect switch on the SD card is set to the LOCK position,
data cannot be written onto or deleted from the card, and the card cannot be
formatted.
data cannot be written onto or deleted from the card, and the card cannot be
formatted.
Write-protect switch