Panasonic NV-GS120GN ユーザーズマニュアル
Before Use
-14-
To Increase the Brightness of the Entire LCD
Monitor
Press the [POWER LCD] Button.
When you press the [POWER LCD] Button, the
LCD monitor becomes bright about twice as
much as usual.
Monitor
Press the [POWER LCD] Button.
When you press the [POWER LCD] Button, the
LCD monitor becomes bright about twice as
much as usual.
The [POWER LCD] Lamp
(26)
lights up.
≥When turning the power on with using AC
Adaptor, [POWER LCD] function is
automatically effective.
automatically effective.
To Resume Normal Brightness
Press the [POWER LCD] Button again.
Press the [POWER LCD] Button again.
To Change the Picture Quality of the LCD
Monitor (NV-GS200 only)
Set the [LCD AI] on the [LCD/EVF] Sub-Menu to
[ON] or [OFF].
[ON]: The screen image becomes clear and
Monitor (NV-GS200 only)
Set the [LCD AI] on the [LCD/EVF] Sub-Menu to
[ON] or [OFF].
[ON]: The screen image becomes clear and
vivid. (The effect varies according to the
recording scene.)
recording scene.)
≥When Power LCD Lamp lights up, [LCD AI] is
automatically set to [ON]. You cannot change
this setting. (NV-GS200 only)
this setting. (NV-GS200 only)
≥These adjustments do not affect the recorded
images.
≥For other notes concerning this item, see
-65-
.
Using the Menu Screen
To facilitate the selection of a desired function or
setup, this Movie Camera displays various
function setups on Menus.
≥When operating the menu with the Viewfinder,
setup, this Movie Camera displays various
function setups on Menus.
≥When operating the menu with the Viewfinder,
set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or
rotate the LCD monitor by 180
rotate the LCD monitor by 180
o.
1
Press the [MENU] Button
(14)
.
POWER
LCD
(26)
STILL
ENTER
FADE
MENU
i
s
(14)
≥The Menu corresponding to the Mode
selected by using the Mode Dial
(39)
is
displayed.
2
Press the [
;/∫] Button to select a desired
Sub-Menu.
≥Press the [;/∫] Button to display the
≥Press the [;/∫] Button to display the
highlighted item.
3
Press the [
5] Button to display the
selected Sub-Menu.
4
Press the [
;/∫] Button to select the item.
5
Press the [
5] Button to display the
selected item.
6
Press the [
;/∫] Button to select the desired
mode and press [ENTER] Button to
determine the setting.
determine the setting.
≥While a Menu is displayed, you cannot record or
play back. Menus can be displayed during
playback but not during recording. The above
operations can be done using the [MENU]
Button, [
playback but not during recording. The above
operations can be done using the [MENU]
Button, [
π, ∑, ∏, ∫] Buttons and [ENTER]
Button on the Remote Controller. (
-6-
)
To Return the Previous Screen
Press the [
Press the [
6] Button.
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained
even when the Movie Camera is turned off.
However, if the Battery or AC Adaptor is
disconnected before turning off the Movie
Camera, the selected setup may not be retained.
(The setups of [EFFECT2] (
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained
even when the Movie Camera is turned off.
However, if the Battery or AC Adaptor is
disconnected before turning off the Movie
Camera, the selected setup may not be retained.
(The setups of [EFFECT2] (
-33-
) are not retained.)
≥Menu operation flow is shown in this text by >>.
ª File Selection in the Picture/MPEG4
Playback Mode (MPEG4 Playback
Mode on NV-GS200 Model only)
Mode on NV-GS200 Model only)
A File Selection Operation may be necessary
during Menu Operations. In this case, carry out
the following procedure.
during Menu Operations. In this case, carry out
the following procedure.
1
Press the [
;/∫/6/5] Button and select
a file.
≥The selected file is marked by a frame.
≥The selected file is marked by a frame.
PC
SD
(39)
PICTURE
No.25 100-0012
120.200GN.book 14 ページ ２００４年２月２６日 木曜日 午後１２時７分