Panasonic PV-GS250 ユーザーズマニュアル
Record mode
31
LSQT0862
ª
Select the size of still pictures to be
recorded on a card
recorded on a card
1
Set [BASIC] >> [PICTURE SIZE] >> select
the desired picture size.
the desired picture size.
[2048]: 2048
k1512
[1600]: 1600
k1200
[1280]: 1280
k960
[640]:
640
k480
ª
Select the picture quality for
photoshot images
photoshot images
1
Set [BASIC] >> [PICT. QUALITY] >> select a
desired picture quality.
desired picture quality.
[
]: High picture quality
[
]: Normal picture quality
≥You can also change the picture quality on
[ADVANCE] >> [PICT. QUALITY] in the tape
recording mode.
recording mode.
ª
Recording with a shutter operation
effect
effect
You can add a shutter operation simulating
sound.
sound.
1
Set [ADVANCE] >> [SHTR EFFECT] >> [ON].
ª
About the shutter chance mark
≥The shutter chance mark does not appear in
manual focus mode.
≥When the subject is not easily focused, focus on
the subject manually.
≥You can record still pictures on the card even if
the shutter chance mark does not appear, but
pictures may be recorded without being
focused.
pictures may be recorded without being
focused.
≥The shutter chance mark does not appear or
has difficulty displaying in the following
cases.
cases.
≥When the zoom magnification is high.
≥When the Camcorder is shaken.
≥When the subject is moving.
≥When the subject stands in front of a light
≥When the Camcorder is shaken.
≥When the subject is moving.
≥When the subject stands in front of a light
source.
≥When close subjects and far subjects are
included in the same scene.
≥When the scene is dark.
≥When there is a bright part in the scene.
≥When the scene is filled with only horizontal
≥When there is a bright part in the scene.
≥When the scene is filled with only horizontal
lines.
≥When the scene lacks contrast.
ª
Concerning the focusing area
≥When there is a contrasting object ahead or
behind the subject in the focus area, the subject
may not be focused. Move the contrasting
object out of the focus area.
may not be focused. Move the contrasting
object out of the focus area.
Zoom in/out function
You can zoom in up to 10
k optically.
≥Set to Tape/Card Recording Mode.
1
Wide-angle recording (zoom out):
Push the [W/T] lever towards [W].
Close-up recording (zoom in):
Push the [W/T] lever towards [T].
Push the [W/T] lever towards [W].
Close-up recording (zoom in):
Push the [W/T] lever towards [T].
≥When zooming in and taking a picture while
holding the Camcorder by hand, we recommend
using the image stabilizer function.
using the image stabilizer function.
≥When you are zooming on a faraway subject, a
sharper focus is achieved if the recording
subject is 3.9 feet (1.2 m) or further from the
Camcorder.
subject is 3.9 feet (1.2 m) or further from the
Camcorder.
≥When the zoom speed is high, the subject may
not be focused easily.
≥When the zoom magnification is 1k, the
Camcorder can focus on a subject approx.
1.6 inches (4 cm) distant from the lens.
1.6 inches (4 cm) distant from the lens.
ª
Digital zoom function
If the zoom magnification exceeds 10 times, then
the digital zoom function will be activated. The
digital zoom function allows you to select a
magnification from 25
the digital zoom function will be activated. The
digital zoom function allows you to select a
magnification from 25
k to 700k.
1
Set [ADVANCE] >> [D.ZOOM] >> [25
k] or
[700
k].
[OFF]:
Optical zoom only (Up to 10
k)
[25
k]:
Up to 25
k
[700
k]: Up to 700k
≥The larger the digital zoom magnification, the
more the image quality is degraded.
≥When the Card Recording mode is used, the
digital zoom function cannot be used.
VOL
W
T
1
tW
5
tW
10
tW
T
T
T
25
tW
T
LSQT0862ENG.book 31 ページ ２００４年１２月２１日 火曜日 午後５時９分