Panasonic HDC-DX1 ユーザーズマニュアル

VQT1A15

Setup

Adjusting LCD monitor/

viewfinder

Press the MENU button, then
select [SETUP]

[LCD SET] or

[EVF SET]

[YES] and press the

cursor button.

Move the cursor button up or
down to select the item to be
adjusted. Then, press the centre
of the cursor button to set and
then move the cursor button left
or right to make the adjustment.

The bar display moves.
≥After adjustments are made if no operations

are performed for about 2 seconds, the bar will
disappear.

≥Press the MENU button to exit the menu

screen.

[LCD SET]
[BRIGHTNESS]: Brightness of the LCD monitor
[COLOUR]:

Colour level of the LCD monitor

[EVF SET]
[BRIGHTNESS]: Brightness of the viewfinder

≥To adjust the brightness of the viewfinder,

close the LCD monitor and extend the
viewfinder to activate it.

≥When the LCD monitor is rotated by 180°

towards the lens, the brightness and colour
level of the LCD monitor cannot be adjusted.

≥These settings will not affect the images

actually recorded.

ª In order to increase the

brightness of the entire LCD
monitor

Press the POWER LCD button.

The [

] indication appears on the LCD

monitor.
≥Press the POWER LCD button if the

surroundings are bright and the LCD monitor is
difficult to see. The entire LCD monitor will
become approx. twice as bright as usual.

≥When the POWER LCD button is pressed

again, the [

] indication disappears and the

original brightness is restored.

≥This will not affect the images to be recorded.
≥If you turn on the unit when the AC adaptor is

used, this function will automatically be
activated.

≥This function cannot be used in PC connection

mode.

Adjusting the brightness and
colour level

POWER LCD

VQT1A15ENG.book 41 ページ２００７年１月２９日　月曜日　午後８時２４分