Panasonic AG-HMC70P ユーザーズマニュアル
45
Recording
ª Screen indications in the
recording mode
A Recording mode
B Remaining time left for recording
B Remaining time left for recording
(When the remaining time is less than
1 minute, [R0min] flashes red.)
1 minute, [R0min] flashes red.)
C Recording time elapsed
≥Maximum number of recordable scenes: 990 (It
may not be possible to record 990 scenes even
if there is available memory on the SD card.)
if there is available memory on the SD card.)
≥Maximum number of recordable scenes with
different dates: 99
(In some cases, scenes shot on the same day
will be recorded with different dates. (l 69))
(In some cases, scenes shot on the same day
will be recorded with different dates. (l 69))
≥SD cards with more than the maximum scenes
or different dates cannot be used with this unit.
≥Sound is recorded from the internal
microphones on the top of this unit. Take care
not to block this microphone.
not to block this microphone.
≥Connect or disconnect the external microphone
to or from the external microphone input
connector or the Audio XLR input connector
while pausing operation. If an external
microphone is connected or disconnected while
recording, the audio will not be recorded
properly.
connector or the Audio XLR input connector
while pausing operation. If an external
microphone is connected or disconnected while
recording, the audio will not be recorded
properly.
≥Each time the unit is put into recording pause,
the counter display will be reset to “0h00m00s”.
≥When recording motion pictures, do not remove
the battery or disconnect the AC adaptor. Also
do not remove the SD card while the card
access lamp is lit. If you do either of the above,
the scene recovery message is displayed and
the recovery operation will begin when the SD
card is next inserted or the power is turned
back on. (l 109)
do not remove the SD card while the card
access lamp is lit. If you do either of the above,
the scene recovery message is displayed and
the recovery operation will begin when the SD
card is next inserted or the power is turned
back on. (l 109)
ª When recording stops suddenly
during motion picture recording
When using an SD card other than one that can
be used for motion picture recording (l 27), the
recording may stop suddenly. At this time, the
following message appears.
When motion pictures are to be recorded, use a
Panasonic SD card or another SD card which
can be used to record motion pictures. (l 27)
be used for motion picture recording (l 27), the
recording may stop suddenly. At this time, the
following message appears.
When motion pictures are to be recorded, use a
Panasonic SD card or another SD card which
can be used to record motion pictures. (l 27)
Even if you use an SD card that can be used
for motion picture recording (l 27), this kind
for motion picture recording (l 27), this kind
of message may appear.
The data on the card has been written many
times and the data writing speed has reduced.
We recommend formatting the SD card being
used. (l 78) When an SD card is formatted, all
the data recorded on it will be deleted so copy
valuable data to the PC prior to formatting.
(l 99) (When acquiring data recorded on this
unit, we recommend using HD Writer Ver2.5 to
acquire it. (l 89))
The data on the card has been written many
times and the data writing speed has reduced.
We recommend formatting the SD card being
used. (l 78) When an SD card is formatted, all
the data recorded on it will be deleted so copy
valuable data to the PC prior to formatting.
(l 99) (When acquiring data recorded on this
unit, we recommend using HD Writer Ver2.5 to
acquire it. (l 89))
B
C
C
A
REC STOPPED.
NOW WRITING.
NOW WRITING.
INCOMPATIBLE CARD.
PLEASE CHECK CARD.
PLEASE CHECK CARD.
VQT1Q93_ENG_PP.book 45 ページ ２００８年３月６日 木曜日 午後５時４２分