3com iCV-01a ユーザーズマニュアル

This section allows the user to define hotspots, required patrol boundary, and 
see where the current camera position. 

 

 

 

 

Fig.15  WebCAM Patrol Setting / Controls 

User 
defined  
Pan Tilt 
boundary

Maximum boundary (x,y) 
of the Pan Tilt camera 

Click to select which 
camera to control. 

User defined 
hot spot bubble.

Current 
camera 
position 
and view 
area. 

Show ful
Pan Tilt 
range. 

 

This part shows the hotspot coordinates and the Administrator can give each 
location a name.  Click and hold on the Hotspot bubble in the above patrol 
control to re-define the coordinates. 

 

Enter a 
name for 
the selected 
hotspot

 

 

Enter a 
name for 
the selected 
hotspot

 

This defines the camera patrol boundary.    Click and hold on either one of the 
two boundary bubble to redefine the boundary. 

 

Select Yes to start auto patrolling function. 

Select No to stop the patrolling function. 

 

Choose from 5 different patrolling formats; 

a.  Oscillating – The camera will pan and tilt at the same time within the user 

defined boundary.    Camera will oscillate from left to right and back.