Philips NV-GS120EB ユーザーズマニュアル
Before Use
-15-
2
Adjust the LCD Monitor angle according to
the desired recording angle.
≥The LCD Monitor can rotate a maximum of
the desired recording angle.
≥The LCD Monitor can rotate a maximum of
180
o 1 from the vertical position upwards
and a maximum of 90
o 2 to the downward
direction. Forcefully rotating the LCD Monitor
beyond these ranges will damage the Movie
Camera. You cannot rotate the LCD Monitor
when it is opened 120
beyond these ranges will damage the Movie
Camera. You cannot rotate the LCD Monitor
when it is opened 120
o angle. Therefore, do
not rotate it forcibly.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.
Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.
ª Adjusting Brightness and Colour
Level
When [LCD/EVF SET] on the [LCD/EVF]
Sub-Menu is set to [YES], the following items are
displayed.
Sub-Menu is set to [YES], the following items are
displayed.
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD
screen.
LCD Colour Level [LCD COLOUR LEVEL]
Adjusts the colour saturation of the image on the
LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the
Viewfinder.
Adjusts the brightness of the image on the LCD
screen.
LCD Colour Level [LCD COLOUR LEVEL]
Adjusts the colour saturation of the image on the
LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the
Viewfinder.
To Adjust
Press the [
Press the [
;/∫] Button and select the item to be
adjusted, and then press the [
6/5] Button to
raise or lower the number of vertical bars in the
Bar Indication.
≥A larger number of vertical bars indicates
Bar Indication.
≥A larger number of vertical bars indicates
stronger brightness or colour saturation.
290
o
1180
o
1LCD BRIGHTNESS
[-]||||----[+]
[-]||||----[+]
LCD COLOUR LEVEL
[-]||||----[+]
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
[-]||||----[+]
;/∫:SELECT &/%:SETUP
!/MENU:EXIT
LCD/EVF SETUP
To Increase the Brightness of the Entire LCD
Monitor
Press the [POWER LCD] Button.
When you press the [POWER LCD] Button, the
LCD monitor becomes bright about twice as
much as usual.
Monitor
Press the [POWER LCD] Button.
When you press the [POWER LCD] Button, the
LCD monitor becomes bright about twice as
much as usual.
The [POWER LCD] Lamp
(26)
lights up.
≥When turning the power on with using AC
Adaptor, [POWER LCD] function is
automatically effective.
automatically effective.
To Resume Normal Brightness
Press the [POWER LCD] Button again.
Press the [POWER LCD] Button again.
To Change the Picture Quality of the LCD
Monitor (NV-GS200 only)
Set the [LCD AI] on the [LCD/EVF] Sub-Menu to
[ON] or [OFF].
[ON]: The screen image becomes clear and
Monitor (NV-GS200 only)
Set the [LCD AI] on the [LCD/EVF] Sub-Menu to
[ON] or [OFF].
[ON]: The screen image becomes clear and
vivid. (The effect varies according to the
recording scene.)
recording scene.)
≥When Power LCD Lamp lights up, [LCD AI] is
automatically set to [ON]. You cannot change
this setting. (NV-GS200 only)
this setting. (NV-GS200 only)
≥These adjustments do not affect the recorded
images.
≥For other notes concerning this item, see
-66-
.
Using the Menu Screen
To facilitate the selection of a desired function or
setup, this Movie Camera displays various
function setups on Menus.
≥When operating the menu with the Viewfinder,
setup, this Movie Camera displays various
function setups on Menus.
≥When operating the menu with the Viewfinder,
set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or
rotate the LCD monitor by 180
rotate the LCD monitor by 180
o.
1
Press the [MENU] Button
(14)
.
POWER
LCD
(26)
STILL
ENTER
FADE
MENU
i
s
(14)
120.200B.book 15 ページ ２００４年２月２５日 水曜日 午後４時０分